About Author
Adept Water Technologies develops and markets the BacTerminator systems for inline disinfection and purification of water.
See partnerThe unique electrolysis technology in the BacTerminator secures that you are getting the most efficient water disinfection method in the market. Primary and secondary water disinfection with 1 unit.
Bacteria in process water systems are common. Using the BacTerminator® water disinfection system in your process water operations will:
- Ensure better and more efficient disinfection than other methods
- Improve water hygiene and quality
- Improve health and safety in your working environment
- Reduce the risk of product contamination
- Reduce or eliminate the need for biocide addition
- Reduce microbial corrosion
- Reduce the time and cost spend on cleaning and servicing your process water system
- Enable process water to be reused
Applications: Food Industry
- Diaries
- Vegetables
- Breweries
- Cooling water
- Drinking water
Technology
BacTerminator® uses the principle of electrolysis for disinfection. By electrolyzing the feed water, BacTerminator® generates a powerful disinfection in the electrolysis chamber. This ensures a high rate of disinfection, with a very low residual concentration of Cl2.
The BacTerminator® technology has several benefits, including:
- No need to add chemicals to the disinfection process
- Low operating costs
- Low maintenance
- Suitable for a wide range of applications
Technical specifications
Flow rate:
BT 1 300 – 1.800 l/h
BT 2 600 – 3.600 l/h
BT 5 3.000 – 6.000 l/h
BT 10 6.000 – 12.000 l/h
BT 20 12 – 25 m3/h
BT 30 25 – 35 m3/h
BT 40 35 – 45 m3/h
BT 50 45 – 55 m3/h
BT 60 55 – 65 m3/h
BT 80 65 – 90 m3/h
BT 100 90 – 110m3/h
BT 120 110 – 130 m3/h
BT 150 130 – 170 m3/h
General:
Pressurized feed water or integrated pump, Touch-Screen, PLC operation, Easy plug and play solution, IP65 protection
Options:
Decalfication system, hygienic design, chlorine monitoring, remote surveillance, pre-filter, brine booster, skid mounting
Requirements for feed water:
Media Fresh or process water
Filtered to <1mm
Conductivity >200µS/cm
Chloride level >10 mg/l
Ambient temperature 5-400C
Note: High NVOC/COD content may reduce efficiency
Electrical specifications:
110 V/230 VAC/380 VAC, PE
1,2 KVA – 90 KVA
Standby use <100 W for all models
- 7 Solutions
- 2 News
- Michael Wick
- +45 88 70 85 25